Skip to main content

Printer Setup - Star mPOP Printer & Cash Drawer

How to set up a Star mPOP printer & Cash Drawer to work with Bustle

Brent Wimmers avatar
Written by Brent Wimmers
Updated over a week ago
  • Turn mPOP ON and fill with paper (NB: Paper for mPOP goes in upside down) - make sure blue light is ON

  • Pair the mPOP and your iPad via bluetooth settings on the iPad - Settings > Bluetooth. Make sure Bluetooth is ON, locate the printer in the list and press it to connect.


When configuring the printer for Bustle

Here are the mPOP specifics for printer setup, and for the full printer configuration process and explanation of the settings, hit the button at the bottom of this article.

  • On the Bustle Till App, press the Settings button (top right)

  • Select Printers > Add Printer

  • Click Active to ON

  • Press Printer and select Star Micronics mPOP Bluetooth

  • Press Search for Printers

Your printer will appear like below when found:

posBoss bluetooth printers

And once set up should appear like this in your Printer Settings

NB: Font on dockets & receipts is smaller than standard ethernet & wifi printers due to the smaller paper size used. Star mPOP take a thermal roll size of 57x50mm.

Press Test Print to check it's ready to go. Please be aware of the following...


Permission for Bustle to access your network

While setting up you printer or printing for the first time after a reinstall of Bustle, you may me prompted to allow access for Bustle to your local network. Click OK or you will not be able to print from Bustle.

Should you have selected Don't Allow by error, check out this article on how to get it fixed up.


And Lastly...

Complete the printer setup by following this guide that helps you understand the settings and get your order dockets printing correctly.

Did this answer your question?