NB: Wi-fi printers need a commercial router with a very stable and robust Wi-fi network to work effectively. If you have any concerns or questions - please get in touch with us through the support channel
To set up your Star TSP143IIIWLAN Wifi printer ready for configuration in Bustle, please do the following:
Turn the Star Wi-Fi printer on.
Hold the Pair button on back of printer until blue light starts flashing (2 secs).
Push the WPS button on your router.
If successful: The printer will print a Network configuration docket. If not successful: You will see a printout displaying ‘no connection’.
If you get the no connection printout, try steps 2 & 3 again
If connection is successful: Configure the printer in the Bustle iPad App using the instructions below (NB: add it as a Star Ethernet printer)
Optional Extra: For extra stability you can download the driver and set a static IP as per Star’s instructions that come in the printer box.
When configuring the printer for Bustle
Follow the "Configure" process below, but note the specific settings lower on this page.
Your printer will appear as follows when found:
Make sure to Select Star Micronics TSP143III Ethernet under Printer in the settings - and you're away!
Permission for Bustle to access your network
While setting up you printer or printing for the first time after a reinstall of Bustle, you may me prompted to allow access for Bustle to your local network. Click OK or you will not be able to print from Bustle.
Should you have selected Don't Allow by error, check out this article on how to get it fixed up.