Before we start here's some things to note
Smartlink is no longer supported by Shift4 (formerly Smartpay) for integration. If you are using SmartConnect - this article is not the one. Head on over here.
For anyone still using Smartlink - please get in touch with Shift4 to get moved across to SmartConnect. The following information should still work for existing customers on Smartlink - but we do recommend discussing options for your payment terminal going forward.
Getting Set Up
Set up the terminal with Shift4 (formerly Smartpay)
Once you receive the terminal give Shift4 (formerly Smartpay) a call and ask them:
to get you set up with Smartlink
for the terminal to have a Static IP
to show you how to find the IP address
Set up Bustle for eftpos
Select your provider in Setup > iPad Setup on your Bustle Hub.
Here you will see the Eftpos Integration selector Click inside the button where it says None then select your provider.
Click Save then make sure you press sync menu in Bustle app on your iPad as detailed below...
NEXT STEPS:
In the Bustle till app go to: Settings > Press Sync Menu.
After syncing is finished, fully close and restart the Bustle till app (press the iPad’s home button twice, and swipe up on Bustle to close).
Open the Bustle till app again then: Settings > Eftpos > Connect
Locate the IP address from your Eftpos terminal and enter the IP address of the Eftpos terminal into the field at the top called Smartpay Terminal IP Address, replacing the default text.
Test by pressing Logon. The terminal will run its test and should then print out a success message. (Please note: As mentioned above, the s920 terminal will show an error on the setup page but should work fine in "live" mode.)
