Skip to main content

Paperless - Set up for your venue.

How to get Paperless set up right for your venue.

Written by Brent Wimmers

You’re signed in, your device has a name - now let’s get Paperless working your way. Every venue runs a little differently. We’ll walk you through the settings so you can choose what works best for your team when service gets busy.
​

Not signed in yet? Start here.


What do we cover in this article?


In this guide, you’ll:

  • Set up alerts so new orders don’t go unnoticed

  • Choose a font size that’s easy to read

  • Decide how many rows to show and how orders fill your screen

  • Show or hide completed items

  • Set up order stages to match how your team works

So let's get started! Press the Settings Cog at the top right of the paperless screen, then press Configure Device.


Rename your location

You set this up on sign in, but should you need to change the name of your Paperless location, do this under DEVICE.

Tap Name and the keyboard will pop up and allow you to update it.
​


Set up the Ding - your alerts for new orders

We've set up the Paperless DING to happen on the iPad and not affect any music you may be streaming through bluetooth or wi-fi to your speakers.

What dings?

  • New Orders

  • Split Tabs

  • Split Tables

  • Hospo Orders

  • Wastage (the ding will happen but no order will appear on screen)

What doesn't ding?

  • Voids

  • Moving orders to serving or done

  • Renaming tabs

  • Moving tabs to tables

  • Moving a table to another table


STEP 1: Enable Alerts

Under ALERTS AND NOTIFICATIONS, toggle on Enable New Order Alert


STEP 2: Configure the Alert

Press Configure Alert to open up the menu. Here you have a few choices on which way to deliver the audio.


We recommend not using this iPad to stream music, but we have options if you do.
You have two options - Alert, or Media.
​

Recommendation: If you want it louder, select Media and turn those volume buttons to max


Setting sound notifications to Alert

This is the generic alert that uses the Ringer and Alerts volume controls in the Sounds setting on your iPad, not the volume controls buttons. This option is limited in the volume it can produce.

If you are using the Alert setting, make sure this little bell looks like it does below in your iPad Control Centre.

Head to Settings > Sounds on your iPad and make sure your RINGER AND ALERTS setting is pumping out the volume!


Setting sound notifications to Media (Recommended for loudness)

This option uses the volume side buttons and is a little louder when coming out of the iPad speaker. You can also use this to connect a bluetooth speaker to increase the volume further. If you are also streaming to the speaker, there are also some controls to help.

You can select to always use the iPad speaker, or toggle this off to allow it to play to your external Bluetooth speaker. When toggled off you can select how to manage the alert when streaming audio.

Press Other Audio and select the option that works best for you.


STEP 3 - Select your tune

And finally, under the SOUND section press Tone and select your favourite tone from the 21 available. Press Test Sound Alert to hear the volume.

That's it. You'll be dinging away in no time!


Change the font size of your orders

Under the Order section, use the slider to set the font size that works best for you.


Set up your docket layout

Get your dockets lined up your way. Choose a layout that suits your service, how many orders you juggle at once and how you like to swipe through them.

Rows

Choose 1 row for longer dockets, or go with 2 rows to fit more short orders on screen. Handy when most orders are just an item or two.

Fill order

Using 2 rows? Choose how new orders fill your screen: Down Columns or Across Rows.
​

Down Columns runs from top to bottom, starting on the right, then moving to the top of the next column on the left. Swipe left or right to see more orders. The number beside the scroll bar shows how many orders are off screen.

Across Rows runs from right to left, starting on the top row, then moving to the right of the next row down. Swipe up or down to see more orders. The number beside the scroll bar shows how many orders are off screen.

Completed

Swiping individual items to done? Choose whether they stay visible and greyed out on the docket in Preparing, or disappear from view. Begone, completed items!


Choose your order stages

Do you send items or orders straight to done? or do you have a service station where items are sent to Serving?
Use this setting to remove or add the Serving stage to your paperless layout


What's Next?

Now you have successfully configured Paperless the way you want it to work, it's time to check out how to manage the dockets when they arrive.

Did this answer your question?